VÀI NÉT VỀ MÁY TRẢI BÊ TÔNG XI MĂNG WIRTGEN

Máy trải bê tông Wirtgen SP 1500
Công nghệ làm đường bê tông xi măng đã và đang được ứng dụng rộng rãi trên thế giới. Công nghệ này cũng được ứng dụng rất phổ cho hệ thống giao thông tại Việt Nam. Theo thống kê của Bộ Giao thông vận tải, tổng số đường giao thông nông thôn trong cả nước là 172.437 km, trong đó chỉ có 0,56 % mặt đường bê tông nhựa và 7,2 % mặt đường nhựa hoặc bê tông xi măng.
Một số khu vực sử dụng đường bê tông xi măng điển hình tại các sân bay như Sao Vàng, Tân Sơn Nhất, Nội Bài, Phú Bà.. Các con đường làm bằng bê tông xi măng thường sở hữu tuổi thọ cao, khả năng chịu áp lực cực kỳ tốt.
Hiện nay công tác rải, san, đầm và hoàn thiện bề mặt bê tông đều được thực hiện bằng máy cho năng suất cao hơn thủ công, chất lượng công trình tốt hơn nhiều lần. Trong số đó phải kể đến là các sản phẩm máy trải bê tông xi măng nổi tiếng của tập đoàn Wirtgen. Đây là một trong những thương hiệu lâu đời, nổi tiếng và chất lượng bậc nhất trên thế giới, mang đến độ trải chính xác tuyệt đối, sẵn sàng đáp ứng mọi yêu cầu khắt khe nhất.

Dưới đây là bài giới thiệu chi tiết về máy trải bê tông xi măng Wirtgen SP 1500:
ĐẶC TÍNH KỸ THUẬT MÁY TRẢI BÊ TÔNG WIRTGEN SP 1500
KÍCH THƯỚC MÁY TRẢI BÊ TÔNG WIRTGEN SP 1500 |

|

|
PHẠM VI ỨNG DỤNG MÁY TRẢI BÊ TÔNG WIRTGEN SP 1500 |
|
SLAB PAVING |
Concrete spreading equipment |
Spreading plough for working width |
mm |
5 000 - 15 250 |
Slab paving equipment for bottom-layer concrete |
Working width |
mm |
5 000 - 15 250 *1 |
Paving thickness |
mm |
0 - 400 *1 |
Transverse camber adjustment |
% |
0 - 3 |
Dowel bar inserter |
Working width |
mm |
5 000 - 15 250 *2 |
Diameter of dowel bars |
mm |
20 - 40 *2 |
Dowel bar length |
mm |
450 - 600 *2 |
Longitudinal joint tie bar inserter |
Diameter of tie bars |
mm |
20 - 40 *3 |
Tie bar length |
mm |
400 - 1 200 *3 |
Vibration for bottom-layer concrete |
Connectors for electric vibration |
|
16, can be extended to 48 (option) |
Number of electric vibrators, curved |
|
16, can be extended to 48 (option) |
High-frequency generator |
kVA |
80 |
Slab paving equipment for top-layer concrete |
|
|
Working width |
mm |
5 000 - 15 250 1 |
Paving thickness |
mm |
0 - 500 *1 |
Transverse camber adjustment |
% |
0- 3 |
Oscillating beam |
Working width |
mm |
5 000 - 15 250 |
Super smoother |
Working width |
mm |
5 000 - 15 250 |
Side tie bar inserter |
Diameter of tie bars |
mm |
20 - 40 *3 |
Tie bar length |
mm |
400 - 800 *3 |
Vibration for top-layer concrete |
Connectors for electric vibration |
|
16, can be extended to 32 (option) |
Number of electric T-vibrators |
|
10, can be extended to 32 (option) |
High-frequency generator |
kVA |
80 |
Động cơ |
Nhà sản xuất |
|
Caterpillar |
Loại |
|
C11 ATAAC |
Làm mát |
|
Bằng nước |
Số xi lanh |
|
6 |
Công suất định mức ở 2 300 vòng / phút |
kW / HP / PS |
287 kW / 385 HP / 390 PS |
Dung tích xi lanh |
cm3 |
11 100 cm3 |
Tiêu thụ nhiên liệu, toàn thải |
lít / h |
78.7 |
Tiêu thụ nhiên liệu, 2/3 |
lít / h |
52.5 |
Tiêu chuẩn khí thải |
|
EU Stage 3a / US Tier 3 |
Hệ thống điện |
Nguồn điện cấp |
|
24 V |
Dung tích các thùng chứa |
Thùng nhiên liệu |
lít |
880 |
Thùng dầu thủy lực8 |
lít |
420 |
Thùng nước |
lít |
870 |
Các đặc tính hệ thống dẫn động |
Tốc độ trải |
m / phút |
0 - 7.5 |
Tốc độ lúc di chuyển |
m / phút |
0 - 22 |
Bánh xích |
Số bánh |
|
2 |
Hộp số |
|
Tank-type steering |
Kích thước (L x W x H) |
mm |
3 350 x 300 x 695 |
Điều chỉnh độ cao của máy |
Điều chỉnh bằng thủy lực, tối đa |
mm |
950 |
Kích thước vận chuyển (L x W x H) |
Machine for bottom-layer concrete, working width 15 250 mm |
mm |
16 850 x 3 800 x 3 100 |
Machine for top-layer concrete, working width 15 250 mm |
mm |
16 850 x 3 600 x 3 100 |
Trọng lượng máy |
Operating weight, CE*5 of basic machine including options for bottom-layer concrete, working width 15 250 mm |
kg |
59 580 |
Operating weight, CE*5 of basic machine including options for top-layer concrete, working width 15 250 mm |
kg |
48 020 |
Transport weight of basic machine including options for bottom-layer concrete, working width 15 250 mm |
kg |
52 060 |
Transport weight of basic machine including options for top-layer concrete, working width 15 250 mm |
kg |
45 120 |
*1 = Please consult factory for different offset geometries or special applications
*2 = Applicable for the range of dowel bar dimensions specified; for any other dimensions, please consult factory; the dowel bar inserters will be customized in accordance with pre-selected customer requirements
*3 = The range of tie bar dimensions specified above can be covered; for any other dimensions, please consult factory; the longitudinal joint tie bar and side tie bar inserters will be customized in accordance with pre-selected customer requirements
*4 = Weights depend on the machine’s range of equipment and working width
*5 = Weight of machine with half-full water tank, half-full fuel tank, driver (75 kg) and on-board tools
*Thông số kỹ thuật của máy trải bê tông Wirtgen SP 1500 có thể thay đổi mà không thông báo trước
CÁC ƯU ĐIỂM NỔI BẬT CỦA MÁY TRẢI BÊ TÔNG WIRTGEN SP 1500

1. BOTTOM-LAYER CONCRETE PAVER SP 1500
As bottom-layer concrete paver in dual-layer concrete paving, máy trải bê tông Wirtgen SP 1500 paves the bottom concrete layer.
2. TOP-LAYER CONCRETE PAVER SP 1500
As top-layer concrete paver in dual-layer concrete paving, máy trải bê tông SP 1500 paves the top concrete layer “wet-in-wet”.
3. PIVOTING LEGS
Pivoting legs for full adjustment of the track units to the conditions prevailing on site
4. TRACK UNITS
Hydraulically driven, separately height-adjustable and steerable track units for precise driving behaviour and high-precision concrete paving.
5. OPERATOR’S PLATFORM
Ergonomically designed, walkthrough operator’s platform for non-tiring, productive working.
6. OWER UNIT
High-powered, fuel-efficient diesel engine for concrete paving in the optimum performance and torque ranges
7. TELESCOPING MACHINE FRAME
Machine frame telescoping in longitudinal direction to allow full adjustment to site conditions.
8. CONVEYING SYSTEM
Conveying system for transport of the top-layer concrete in front of the top-layer concrete paver
9. INSET PAVING MOULD
Inset paving mould integrated into the machine frame and mounted between the track units
10. CONCRETE SPREADING
Spreading plough for even distribution of the freshly delivered concrete in front of the inset paving mould
11. VIBRATORS
Electrically driven vibrators for reliable concrete compaction.
12. DOWEL BAR INSERTER
Automated insertion of dowel bars to maintain the surface levels of neighbouring concrete slabs
13. LONGITUDINAL JOINT TIE BAR INSERTER
Automated insertion of longitudinal joint tie bars to prevent concrete slabs from drifting apart.
14. SIDE TIE BAR INSERTER
Automated insertion of side tie bars when paving adjacent concrete slabs
15. OSCILLATING BEAM
Eccentrically driven oscillating beam for the production of smooth concrete surfaces.
16. SUPER SMOOTHER
Super smoother for a perfectly smooth surface finish.
CÁC TRANG BỊ CHO MÁY TRẢI BÊ TÔNG WIRTGEN SP 1500
TRANG BỊ TIÊU CHUẨN CHO MÁY TRẢI BÊ TÔNG XI MĂNG WIRTGEN SP 1500
Basic Machine |
880 l fuel tank |
420 l hydraulic oil tank |
870 l water tank |
Electrical system (24 V) |
Separate hydraulic oil cooler |
Main transmission with four outputs |
Two hydraulic pumps controlled by servo valve, closed circuit, for the advance drive (2 independent circuits) |
A hydraulic pump controlled by servo valve, closed circuit, for driving the high-frequency generator |
A hydraulic pump controlled by servo valve, closed circuit, for driving the high-frequency generator |
A pressure-controlled pump, open circuit, for all cylinder functions |
A geared pump for the oil cooler fan |
High frequency generator, 80 kVA, 110 V, 200 Hz, with hydraulic drive motor, for max. 48 vibrators for concrete compacting |
Main Frame and Height Adjustment |
Framework construction in robust, flexurally and torsionally rigid design |
Equipped with paving moulds between the crawler units for a working width of at least 5 m |
The frame with paving mould can be extended to 15.25 m using extension elements |
Crawler unit and crawler unit connections |
Four hydraulically driven crawler units, 2.01 m long with 0.35 m wide PU track pads, transmission ratio 1:305 (SP 1500) |
Hydraulic motors with two speed ranges |
Hydraulic motors with two speed ranges |
Machine Control, Leveling, and Steering |
Digital control system with LCD display which displays all necessary information for the user on a menu and allows parameter settings, e.g. free choice of languages (D/GB/F/E/NL) |
Proportional electrohydraulic levelling and steering by PLC system including four (4) levelling sensors, two (2) steering sensors |
Sensor mountings, adjustable in height and range |
Vibration |
10 horizontal T-vibrators, 500 mm |
16x bended vibrators (D76), electrically driven, with mechanical height adjustment |
Concrete equipment for carriageway paving |
Spreader plough with 2 drives |
Metering gate and guide |
Side header left and right (max. concrete thickness 0.45 m) |
Depth paving mould left and right 0.30 m (others on request) |
Depth paving mould left and right 0.20 m (others on request) |
Oscillating beam 5 m–without crown profile |
Super smoother 5 m–15.25 m |
Electrical control DBI/TBI |
Automatic dowel bar inserter, base 5 m |
Others |
Lighting package with 5 halogen headlights 24 V |
Paint standard cream white RAL 9001 |
TRANG BỊ TÙY CHỌN CHO MÁY TRẢI XI MĂNG WIRTGEN SP 1500
Machine control and levelling and steering |
Slab tracer, 2 pcs |
Slab tracer, 4 pcs |
Pre-equipment for 3D levelling |
Vibration |
Horizontal T-vibrator, electrically driven, 0.50 m wide |
16x bended vibrators (D76), electrically driven, with hydraulic height adjustment |
Bent vibrator D76, electrically driven |
Connection box for 8 vibrators |
Hydraulic vibrator height adjustment, from 5 m working width |
Mechanical vibrator height adjustment from 5 m working width |
Bulkhead plate, from 5 m working width |
Bulkhead plate, can be clamped, from 5 m working width |
Connection box for max. 8 vibration frames of the dowel bar inserter (DBI) |
Concrete equipment for carriageway paving |
Automatic metering gate control for concrete paving moulds |
Oscillating beam - extension element 0.25 m |
Oscillating beam - extension element 0.50 m |
Oscillating beam - extension element 0.75 m |
Oscillating beam - extension element 1.00 m |
Oscillating beam - extension element 1.25 m |
Oscillating beam - extension element 1.75 m |
Oscillating beam - extension element 2.00 m |
Dowel bar inserter (DBI) - extension element 0.25 m |
Dowel bar inserter (DBI) - extension element 0.50 m |
Dowel bar inserter (DBI) - extension element 0.75 m |
Dowel bar inserter (DBI) - extension element 1.00 m |
Dowel bar inserter (DBI) - extension element 1.25 m |
Dowel bar inserter (DBI) - extension element 1.75 m |
Dowel bar inserter (DBI) - extension element 2.00 m |
Base group for dowel bar inserter (DBI) for paving width 5.00 m |
Base group for dowel bar inserter (DBI) for paving width 6.00 m |
Base group for dowel bar inserter (DBI) for paving width 7.00 m |
Base group for dowel bar inserter (DBI) for paving width 8.00 m |
Base group for dowel bar inserter (DBI) for paving width 9.00 m |
Base group for dowel bar inserter (DBI) for paving width 10.00 m |
Base group for dowel bar inserter (DBI) for paving width 11.00 m |
Base group for dowel bar inserter (DBI) for paving width 12.00 m |
Base group for dowel bar inserter (DBI) for paving width 13.00 m |
Base group for dowel bar inserter (DBI) for paving width 14.00 m |
Base group for dowel bar inserter (DBI) for paving width 15.00 m |
Base group for dowel bar inserter (DBI) for paving width 16.00 m |
Longitudinal tie-bar inserter, max. ø 12 - 25 mm, length 800 - 1,200 mm |
Longitudinal tie-bar inserter, max. ø 12 - 25 mm, length 400 - 800 mm |
Longitudinal tie-bar magazine for approx. 200 tie-bars with ø 20 mm |
Paving mould - extension element 0.25 m |
Paving mould - extension element 0.50 m |
Paving mould - extension element 0.75 m |
Paving mould - extension element 1.00 m |
Paving mould - extension element 1.25 m |
Paving mould - extension element 1.75 m |
Paving mould - extension element 2.00 m |
Concrete spreading for offset paving |
Belt conveyor for upper layer |
Operator´s stand |
Weather canopy for operator‘s stand, hydraulically telescoping in heigh |
Others |
Paint in one special colour (RAL) |
Paint in two special colours (RAL) |
Paint in maximum two special colours with substructure in special colour (RAL) |
High pressure cleaner |
Additional water tank, black, 1,100 litres |
Electric cabinet ventilation |
6 halogen headlights 110 V, 500 W |
Generator 22 kVA / 400 V / 230 V, including 6 halogen headlights 230 V, 1 kW |
Crane system, hydraulic drive |
Wire tensioning system, complete with 1,000 m steel wire |
Second tensioning winch for levelling the machine using two wire ropes |
Daily rate for startup |
Export packing |
NÊN MUA MÁY TRẢI BÊ TÔNG WIRTGEN SP 1500 CHÍNH HÃNG, CHẤT LƯỢNG TỐT NHẤT Ở ĐÂU ?


Công ty Cổ phần Tổng Công Ty Vĩnh Phú (VITRAC) tự hào là đơn vị phân phối độc quyền máy trải bê tông Wirtgen SP 1500 tại Việt Nam. Ngoài ra chúng tôi còn cung cấp các loại máy xây dựng từ những thương hiệu nổi tiếng trên thế giới như: xe lu Hamm, máy xúc lật Hitachi, máy đào Hitachi, bơm bê tông Hyundai Everdigm, máy trải nhựa Vogele, xe cẩu, máy trải bê tông xi măng Wirtgen,...
Quý khách có nhu cầu mua máy hoặc được tư vấn miễn phí vui lòng gọi ngay tới Hotline 0906702060. Ngoài ra Quý khách cũng có thể đến xem trực tiếp tại các Văn phòng đại diện của VITRAC:
