Model GT-350E-2
Brand Tadano
Maximum lifting capacity 35,000 kg at 3.0 m
Maximum boom length 10.6 m - 34 m
Maximum lifting height  (boom+jib) 49.2 m
Emission standard EURO Ⅲ
Year of Manufacture  2020
Country of Manufacture Japan
Location Viet Nam
Contact 0906 702 060 (Mr Tuyen)


The GT-350E-2 has a capacity of 35 metric tons and combining strength and comfort.


cẩu tự hành trên xe tải Tadano GT-350E-2


Truck Crane Tadano GT-350E-2


Tadano Truck Crane GT-350E-2 has a round hexagonal box boom of 34.0 m - the longest boom in its class. In addition, with the introduction of a new Automatic Moment Limiter model, the AML offers customers a safer operating environment. Further, improved traveling performance ensures a comfortable drive.


cẩu tự hành trên xe tải Tadano GT-350E-2


Truck Crane Tadano



cẩu tự hành trên xe tải Tadano GT-350E-2




cẩu tự hành trên xe tải Tadano GT-350E-2


cẩu tự hành trên xe tải Tadano GT-350E-2
Maximum lifting capacity boom 35 t x 3 m
Maximum lifting height boom  34 m
boom+jib  49.2 m

Maximum load radius:

boom  30 m
boom+jib  35.5 m
Maximum boom length   10.6 m - 34 m




cẩu tự hành trên xe tải Tadano GT-350E-2

Operator Comfort


The crane cab provides improved livability and a more comfortable working environment. 


The crane operating levers are of finger control type and surely and steadily respond to the operator.


There is no need to detach the counterweights of the GT-350E-2 when traveling on roads. Thus, crane operations can be started once the crane has arrived at a work site.

Automatic moment limiter [AML-C]
cẩu tự hành trên xe tải Tadano GT-350E-2
Tadano's AML-C is easy to use, innovative in design, displays important information to the operator and enables the operator to preset a custom working environment. For example, the AML-C shows the boom angle, boom length, load radius, operating pressure of the elevating cylinder, the extension width of the outriggers, slewing position, rated lifting capacity and present hook load. These features allow the AML-C to move seamlessly through all lifting operations without having to change configurations or input new codes to make the lift. The AML-C safety features provide both audible and visual warnings. When an operation approaches the load limit Tadano's slow stop function engages to avoid shock loads

The engine used in this model of crane is made by Cummins ISLE+325 and has a maximum output of 239 kW. It satisfies the EURO III standards and is environment-friendly.


Cummins ISLE+325, 4-cycle, turbo charged, 6 cylinder in line, direct injection, water cooled diesel engine.


Max. output 239 kW {325 PS}


Max. torque 1,425 N-m {145 kgf-m}

Jing Cheng, BCW5361JQZ

Model: 9JS150T-B


9 forward and 1 reverse speeds


Gross Vehicle Weight: 33,800 kg


Front axle weight: 11,950 kg


Rear axle weight: 21,850 kg


Max. traveling speed: 74km/h


Gradeability(tanθ): 46%


Min. Turning radius: 11m(at center of extreme outer tire)

cẩu tự hành trên xe tải Tadano GT-350E-2

4-section long boom: 10.6 m - 34.0 m


2-staged bi-fold jib: 8.8/15.2 m


Maximum lifting height: 34.0 m (Boom) 49.2 m (Jib)


Maximum load radius: 30.0 m (Boom) 35.5 m (Jib)


Strong winches: 3,190 kgf

Two winches with cable follower
Both the main winch and the auxiliary winch have powerful 3.19-ton line pull and operate at high speeds for increased work efficiency.

Hydraulic axial piston motor driven through planetary speed reducer. Continuous 360 º full circle swing on ball bearing slew ring. Automatic Speed reduction and soft stop function.


Swing speed : 2.5r /min


Pumps - Quadruple gear pumps driven by carrier engine through P.T.O.


Control valves - Multiple valves actuated by pilot pressure with integral pressure relief valves.


Circuit - Equipped with air cooled type oil cooler. Oil pressure appears on AML display for main circuit.


Oil tank capacity - approx. 527liters


Filters - Return line filter

cẩu tự hành trên xe tải Tadano GT-350E-2

Control of asymmetric outrigger extension width


At all times, the new type AML system offers a maximum “work value” for each work area. Even when the outrigger extension width differs between the front and the rear of the crane, or between its two sides, the AML detects such working conditions and displays the optimal value.


4-hydraulically operated H-type outriggers. Each outrigger controlled simultaneously or independently from either side of carrier. Equipped with sight level gauge. Floats mounted integrally with the jacks retract to within vehicle width. All cylinders fitted with pilot check valves. Crane operation with different extended length of each other


Equipped with extension width detector for each outrigger.


Extended width


Fully: 6,100 mm


Middle: 4, 000mm


Minimum: 2,080mm


Float size (Diameter): 400 mm


Front: 11.00R20 single×4


Rear: 11.00R20 double×4




Tire quantity: 13



Write a review

Note: HTML is not translated!

Tags: GT 350E 2, GT 300EL, tadano crane, tadano cranes specifications, biggest tadano crane, tadano truck crane, tadano crane 55 ton, tadano crane 50 ton, tadano crane 25 ton, tadano 100 ton crane, tadano 160 ton crane, tadano 120 ton crane, tadano 80 ton crane, tadano 60 ton crane, tadano 25 ton crane, tadano mobile crane, tadano 130 ton crane, demag mobile cranes, demag crawler cranes, atf 220g 5, tadano faun, kato crane, grove crane, all terrain crane hire, xcmg all terrain crane, 100 ton all terrain crane, rough terrain crane