GTC-800

Length

5-section full power telescoping boom with 2 extension modes. System consists of two double acting cylinders with load holding valves and extension and retraction cables

- Retracted Length: 11.5 m

- Extended Length: 43 m

- Extension Time: 164 s

- Elevating Angles: -1.5° to 81.5°

- Elevating Time: 87 s

- Max Lifting Height: 42 m

- Boom Head: Five, 495 mm diameter cast nylon main sheaves on heavy-duty roller bearings. Two, 445mm diameter cast nylon lead in sheaves on heavy-duty roller bearings). Designed for quick reeving of head and load block.

The GTC series utilizes superior designs from Tadano's global engineering team incorporating proven components from Tadano Japan, such as jibs, winches, and cylinders to achieve improved quality, performance, and reliability. 

Long Boom and Enhanced Lifting Capacity

The GTC booms are purpose designed and manufactured for telescopic boom crawlers by Tadano Japan.

Full power boom system

Robust double acting hydraulic cylinder allows telescoping of all rated loads.

Powerful winch

Grooved drums, cable followers and 3rd wrap shutdown are standard.

Planetary geared one-speed winch includes a hydraulic motor, multidisc internal brake and counterbalance valve. Drum rotation indicator is included:

- Main Winch

+ Rope Diameter and Length: 19 mm x 212 m

+ Single line pull: 88.2 kN (first layer)

+ Single line speed: 112.2 m/min (fourth layer)

- Auxiliary Winch

+ Rope Diameter and Length: 19 mm x 125 m

+ Single line pull: 88.2 kN (first layer)

+ Single line speed: 112.2 m/min (4th layer)

Tough & Durable Design

Simple control system. Class exceeding larger boom sections and boom head, stronger telescopic cylinder

Track frame

Purpose design track frame design incorporating full use of FEM analysis ensuring high strength and durability

Carbody frame

Purpose design rugged carbody frame with strong track extension cylinders.

6 piece counterweight design. Two upper counterweight configurations

- “A” Configuration = 6 804 kg

- “B” Configuration = 13 608 kg

- “C” Configuration = 20 411 kg

- Two carbody counterweights, 4 535 kg each

Each side frame contains a pilot controlled, two-speed track drive with hydraulic axial piston motor and parking brake. Travel system provides skid steering and counter rotation.

- Travel speed - Low: 1.1 km/hr - High: 3.4 km/hr

- Gradeability (unladen): 78%

- Unladen Ground Pressure: 0.81 kg/cm2

Gear motor driving a planetary gear reducer with a shaft mounted pinion, external gear shear ball slew bearing bolted to the superstructure and the carbody allows the superstructure to rotate 360°

- Swing Speed: 0 - 2.2 rpm

- Swing Parking Brake: Spring applied failsafe brake with hydraulic release that is controlled from the operators cab

- Swing Service Brake: Hydraulically applied, controlled through foot actuated pedal

- House Lock System: 4-position house lock (boom over front or rear). Actuated from the operator’s cab.

TADANO AML-C Rated Capacity Limiter and Anti-Two Block system

- OPTI-WIDTH™ - OPTIMAL lifting performance at any track WIDTH

- Control function shutdown. Audible and visual warnings

- LCD screen provides a continuous display of working boom length, boom angle, working load radius, tip height, swing position, partsofline (operator set), machine track configuration, relative load moment, maximum permissible load and actual load.

- Anti-two block weight allows quick reeving of hook block

- Operator configurable working range limits with automatic soft stop

Fully-enclosed, air conditioned all-steel modular cab with lockable sliding door, acoustical lining, anti-slip floor and tinted safety glass.

- Cab tilts 20°.

- Rear view, winch view and right side view video cameras

- Three remote control work lights.

- Vent window in the rear of the cab.

- Grab bars and steps are located for easy access to the cab.

- Defroster, heater, circulating fan

- 2-speed windshield wiper, top glass wiper

- Six-way adjustable fabric seat with headrest, seat belt

- Dome light

- Dry-chemical fire extinguisher

- Four-way electronic armrest mounted joysticks control swing, main winch, auxiliary winch, boom hoist and boom extend. Foot pedals control the travel and swing service brake functions. Swing brake pedal is hydraulic.

- Selectable modes for Fine Control and Travel. Travel function can be operated by foot pedals or joystick.

- Seat termination switch immediately disable all hydraulic functions as the operator rises from the seat. Functions can also be disabled by switch on console.

- Dash instrumentation: tachometer, hour meter, fuel gauge, and DEF level gauge. Indicators are provided for crane level, swing position, load moment, drum rotation, air filter restriction, engine oil temperature and pressure, hydraulic oil temperature and level, and hydraulic and air filter restriction, and low voltage

High power engine provides superior travel and multi-function performance

 Make/ Model: Cummins QSB6.7

- Type: 6 Cylinder, Water cooled, 4 Cycle

- Aspiration: Turbocharged and Aftercooled

- Max.Output: 231 kW @ 2 200 RPM

- Max Torque: 1 044 Nm @ 1 500 RPM

- Piston Disp: 6.7 L

- Emission Cert: U.S. EPA Tier 4f, Euromot Stage IV

- Alternator: 70 amp

Capacity: 321 liter

Filtration: Inline fuel/water separator and engine mounted fuel filter

Two welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab.

- Track Rollers: Three top and ten bottom sealed rollers on each track frame Idler: Oil filled, self lubricating with nitrogen type tensioner

- Track Shoes: 800 mm, 3-bar semi grouse

Hydraulic Pumps: One high pressure, variable axial piston pump with load sense and power limiting control for crane functions. One gear pump for cooling function.

- Directional Valves: Multiple pressure and flow compensated valves with integrated relief valves controlled by electrical signals.

- Pump output: 582 l/min @ 2200 RPM engine speed. 345 bar maximum pressure

- Reservoir: 861 liter capacity, spin-on filler/ breather, sight gauge, cleanout, and sump drain.

- Filtration: Three 5-micron, full flow, tank-mounted return filters with electrical clogging indicator. 3-micron pilot oil in-line pressure filter

- Diagnostic Ports: Provided for system, load sense, and pilot pressure

Main jib

- Total Length: 10.1 m • Offset Angles: 3.5°, 25° & 45°

- Max. Lifting Height: 52.9 m,

Fly jib

- Total Length: 17.7 m

- Offset Angles: 3.5°, 25° & 45°

- Max. Lifting Height: 60.4 m

Self-removable counterweight

Counterweight can be hydraulically installed/removed by operating remote controller without the need of a support crane.

Three counterweight configurations can be selected.

Easy Track Frame Removal Self Erect System

Track frames and track extend beams can be easily unlocked and locked without the need of tools or heavy lifting by our patented system.

TADANO supports your crane management via the Internet, providing information about operational status, position and maintenance.

Monitoring machine information from your computer

1. Work History

HELLO-NET Owner’s Site displays the day-to-day operational status, mileage and remaining fuel for each machine equipped with a communication terminal. In addition, you can view a list displaying the number of hours of operation and the mileage of all your machines for any specified month.

2. Machine Position Data

Using HELLO-NET Owner’s Site, you can check a machine's latest position (up until the previous day) on a map. Two types of position data, listed below, are transmitted automatically from your machine once every day. Work Site: The location where the machine’s PTO has been activated (for one hour or more). Position at Day’s End: The final location from which GPS was able to receive data on a given day.

3. Maintenance Information

You can check the maintenance timetable of your machines for periodical replacement parts and inspection schedule. HELLO-NET supports the maintenance of your machine.

Telematics (machine data logging and monitoring system) with HELLO-NET via internet (*availability depends on the situation).

DETAILS: The availability of data communication systems, such as satellite or mobile communications which serve to widen the service area differs according to individual countries. Besides, there are some countries where the system itself is not in use yet. For details, please contact your distributor or our sales staff in charge.

3D Lift Plan*

Customize 3D lift simulation at your fingertips for FREE**. Easy access and user friendly webpage allows you to calculate crane configurations and ground bearing pressure simultaneously. Moreover, you can print out detailed configurations and 3D graphics to further support your work preparation.

*3D Lift Plan is a product of A1A Software LLC.

**Advanced customize functions will be extra

Heavy lift jib

- Total Length: 2.5 m

- Offset Angles: 3.5° & 30°

- Max. Lifting Height: 45.3 m

Hook blocks

- 80t quick reeve hook block – Five, 495mm steel sheaves, swivel hook and safety latch

- 50t quick reeve hook block – three, 495mm steel sheaves, swivel hook and safety latch

- 20t quick reeve hook block – one, 495mm steel sheave, swivel hook and safety latch

Overhaul ball – 8t with swivel hook & safety latch

- 360 degree house lock. Actuated from the operator’s cab.

- Track Shoes: 800mm and 900mm steel flat shoes, and 800 mm 3-bar semi grousers

- Auger: Hydraulic auger boom package includes auger motor, hoses, fasteners, and stowage bracket assembly mounted to the 2nd stage section of boom for variable radius drilling.

- Tool Circuit: Provides 23 l/min and 45 l/min at 176 bar through a 15.2m twin hose reel with quick disconnect fittings to operate open center tools.

- High Flow Tool Circuit: Provides 170 l/min at 330 bar

- Controlled Free Fall Hoists: Winches are available in controlled free fall configurations.

- Cold Weather Packages: Cold weather options are available for operation to -40°C (Consult factory for application support)

- Work Platform: Model WP750 – 0.9m x 1.8m, all steel, welded, two person platform with maximum capacity of 340 kg (available in approved markets only).

- Radio control package (available in approved markets only).

- Anemometer: boom mounted wireless anemometer with cab display.

- Central lubrication system.