Function and status indicators
The function and status indicators mean that the operator always has full control over his machine, even without a display. he can, for instance, read the fill level of the fuel tank directly and identify whether there are any functional faults.
Choice of operating modes for the paver
All the main paving and machine functions can be controlled directly by individual push-buttons on the paver operator’s ErgoBasic console. The paver changes between operating modes at the push of a button in the following order: “Pave”, “Positioning”, “Job Site” and “neutral”. An LEd indicates which mode is selected. On leaving ”Pave” mode, the memory function stores all the last settings, which means that the paving parameters last used are retrieved immediately after repositioning the machine on the job site, for instance.
Speed of the augers
in automatic mode, the maximum speed of the augers can be adapted to the pave width separately for the left and right using the plus and minus keys. The set value is displayed as a percentage on the LEd strip.
Safe operation during the night
The paver operator‘s ErgoBasic console features glarefree backlighting so that the paver operator can also work safely on night-time jobs.
The speed of the compacting systems can be set directly on the paver operator's ErgoBasic console. The LED strips from 0 to 100% indicate the speed settings for the tamper and vibrators, enabling them to be
adjusted immediately if required.
Steering at a pre-set angle
The machine is steered by means of an easy-grip rotary controller which enables the driver to manœuvre the machine easily and precisely even in the tightest spots. For long bends with a constant radius, the desired steering angle can be preselected using arrow keys. The paver then automatically follows the set path until the function is deactivated, allowing the driver to monitor the paving process undisturbed.
The no-load function is provided for the warm-up or cleaning of conveyors, augers and tamper.