Model CKE1800
Brand Kobelco
Maximum lifting capacity 160 t × 4.4 m
Max. boom length 85.3 m
Year of Manufacture 2020
Country of Manufacture Japan
Location Viet Nam
Contact 0906 702 060 (Mr Tuyen)
Download Brochure Kobelco_Products-Range







cẩu bánh xích kobelco cke1800


Working range chart (Crane Boom)


cẩu bánh xích kobelco cke1800


cẩu bánh xích kobelco cke1800


cẩu bánh xích kobelco cke1800


Limit of Hook Lifting


cẩu bánh xích kobelco cke1800


Heavy Duty Crane Boom


Max. Lifting Capacity 180 t × 3.75 m
Max. Length 42.7 m


Crane Boom


Max. Lifting Capacity 160 t × 4.4 m
Max. Length 85.3 m


Luffing Boom


Max. Lifting Capacity 110 t × 5.2 m
Max. Length 54.9 m


Long Boom


Max. Lifting Capacity 40.1 t × 12.0 m
Max. Length 85.3 m


Fixed Jib


Max. Lifting Capacity 26.8 t × 15.2 m
Max. Length 30.5 m
Max. Combination
73.2 m + 30.5 m


Luffing Jib


Max. Lifting Capacity 48.6 t × 9.14 m
Jib Length 21.3 m – 51.8 m
Max. Combination 54.9 m + 51.8 m
Luffing Angle 60 – 88 degree


Main & Aux. Winch


Max. Line Speed 100 m/min (1st layer)
Rated Line Pull (Single Line) 132 kN {13.5 tf}
Wire Rope Diameter 25.4 mm
Wire Rope Length 430 m (Main) 335 m (Aux.)
Brake Type Spring set hydraulically released (Negative)
Free-Fall Brake Type
Wet-type multiple disc brake (Optional)


Working Speed


Swing Speed 2.6 min-1 {rpm}
Travel Speed 1.1 / 0.7 km/h


Power Plant


Model HINO P11C-UN
Engine Output 247 kW / 2,000 min-1 {rpm}
Fuel Tank Capacity 400 liters


Hydraulic System


Main Pumps 4 variable displacement
Max. Pressure 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity 550 liters


Self-Removal Device






Operating Weight* Approx. 164 t
Ground Pressure 103 kPa {1.06 kgf/cm2}
Counterweight 60.0 t (Upper), 20.0 t (Lower)
Transport Weight** Approx. 44.0 t


Units are SI units. { } indicates conventional units.


Line speeds in table are for light loads. Line speed varies with load.


* Including upper and lower machine, 60.0ton counterweight, 20.0ton carbody weight, basic boom, hook, and other accessories.


** Base machine with boom base, trans-lifter, main and aux. winches (non-freefall) including wire rope, self removal device.




Power Plant

Model: Hino diesel engine P11C-UN


Type: Water-cooled, direct fuel injection, with turbocharger Complies with NRMM (Europe) Tier III and USA EPA Tier III


Displacement: 10,520 liters


Rated power: 247 kW/2000 min-1


Max. Torque: 1300 N·m/1500 min-1


Cooling System: Liquid, re-circulating bypass


Starter: 24V-6kW


Radiator: Corrugated type core, thermostatically controlled


Air cleaner: Dry type with replaceable paper element


Throttle: Electric throttle control, twist grip type


Fuel filter: Replaceable paper element


Batteries: Two 12 V, 170 Ah/20 HR capacity batteries, series connected


Fuel tank capacity: 400 liters

Hydraulic System

Four variable displacement piston pumps are driven by heavyduty pump drive. Two of variable displacement pumps are used in the main hook hoist circuit, auxiliary hook hoist circuit, third hoist circuit and each propel circuit. One of the other two pumps is used in the boom hoist circuit, and the other is used in the swing circuit


Control: Full-flow hydraulic control system for infi nitely variable pressure to all winches, propel and swing. Controls respond instantly to the touch, delivering smooth function operation.


Cooling: Oil-to-air heat exchanger (plate-fin type)


Filtration: Full-flow and bypass type with replaceable element


Electrical system: All wiring corded for easy servicing, individual fused branch circuits


Max. relief valve pressure:


- Load hoist, boom hoist and propel system: 31.9 MPa


- Swing system: 27.5 MPa


- Control system: 7.0 MPa


- Hydraulic Tank Capacity: 550 liters

Boom Hoisting System

Powered by a hydraulic motor through a planetary reducer.


Brake: A spring-set, hydraulically released multiple-disc brake is mounted on the boom hoist motor and operated through a counter-balance valve.


Drum Lock: External ratchet for locking drum


Drum: Single drum, grooved for 22 mm dia. wire rope


Line Speed: Single line on first drum layer


Hoisting/Lowering: 54 m/min


Boom hoisting/lowering: 16 parts of 22 mm dia. high strength wire rope


Boom guy line: 30 mm


Boom backstops: Required for all boom length, Telescopic type with spring bumper

Load Hoisting System

Front and rear drums for load hoist powered by a hydraulic variable plunger motors, driven through planetary reducers.


Negative Brake: A spring-set, hydraulically released multipledisc brake is mounted on the hoist motor and operated through a counter-balance valve. (Positive free fall brake is optional).


Drum Lock: External ratchet for locking drum




Front drum:


617.4 mm P.C.D. x 833.7 mm Lg. wide drum, grooved for 25.4 mm wire rope. Rope capacity is 430 m working length and 510 m storage length.


Rear drum:


617.1 mm P.C.D. x 833.7 mm Lg. wide drum, grooved for 25.4 mm wire rope. Rope capacity is 335 m working length and 510 m storage length.


Note: Rope lengths listed above denote drum capacity and may differ from actual rope lengths supplied when machinery is shipped.


Line speed: Single line on the first drum layer


Hoisting/Lowering: 100 m/min


Line Pull (Single-line):


Rated line pull: 132 kN {13.5 tf}

Swing System

Swing unit is powered by hydraulic motor driving spur gears through planetary reducer (2 set), the swing system provides 360° rotation.


Swing parking brakes: A spring-set, hydraulically released multiple-disc brake is mounted on swing motor.


Swing circle: Single-row ball bearing with an integral internally cut swing gear.


Swing lock: Manually, four position lock for transportation


Swing Speed: 2.6 min-1 (rpm)

Upper Structure

Torsion-free precision machined upper frame. All components are located clearly and service friendly. Engine will with low noise level.


Counterweight: 60 ton

Cab & Control

Totally enclosed, full vision cab with safety glass, fully adjustable, high backed seat with a headrest and armrests, and intermittent wiper and window washer (skylight and front window).


Cab fittings: Air conditioner, convenient compartment (for tool), cup holder, cigarette lighter, sun visor, roof blind, tinted glass, floor mat, footrest, and shoe tray


Controls: Four adjustable levers for front drum, rear drum, boom drum and swing controls, and boom hoist pedal.

Lower Structure

Steel-welded carbody with axles. Crawler assemblies can be hydraulically extended for wide-track operation or retracted for transportation. Crawler belt tension is maintained by hydraulic jack force on the track-adjusting bearing block.


Carbodyweight: 20 ton


Crawler drive: Independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width.


Crawler brakes: Spring-set, hydraulically released parking brakes are built into each propel drive.


Steering mechanism: A hydraulic propel system provides both skid steering (driving one track only) and counter-rotating steering (driving each track in opposite directions).


Track rollers: Sealed track rollers for maintenance-free operation.


Shoes (flat): 64 shoes, 1,070 mm wide each crawler


Max. travel speed: 1.1/0.7 km/h


Max. gradeability: 30%


Including upper and lower machine, 60.0 ton counterweight and 20.0 ton carbody weight, basic boom (or basic boom + basic jib), hook, and other accessories


Boom & Jib: Welded lattice construction using tubular, high-tensile steel chords with pin connection between sections.




Surface drill rig - Atlas Copco Powerroc T35


Surface drill rig - Atlas Copco Powerroc T35


Vinh Phu General Joint Stock Corporation is proud to be a direct distributor of construction machines from famous brands in the world such as Hamm Compactor, Hitachi Excavators, Hyundai Everdigm Concrete Pumps, Vogele Asphalt Pavers, Cranes, Wirtgen Slipform Pavers,...


If you want to buy Kobelco Crawer Crane or get a free consultation, please call Hotline 0906702060 (Mr Tuyen). In addition, you can also come to watch directly at the representative offices of VITRAC:


Surface drill rig - Atlas Copco Powerroc T35